Izu 18 liters Speed-heating central storage type high-pressure electric water heater IPU18S2/2.8Kw

The Izu electric water heater is equipped with a high-efficiency EGO heating tube and a liquid circulation physical system to directly heat the water. The hot water supply time is several times faster than that of a traditional water heater. The factory presets the energy-saving water temperature, which can accurately adjust the hot water temperature, stabilize the water temperature, and supply hot water continuously for a long time.

• EGO constant temperature and rapid heating design
  • Continuous hot water supply time 30 minutes*
• Fast heating, (liquid circulation design) unique patented technology: CN201410487705.0
  • Built-in all-stainless-steel liquid circulation system, so that the hot water in the furnace can continuously circulate and flow up and down. The internal water temperature is quickly heated and evenly distributed to 38-42 degrees Celsius. After the water is heated, it can reach 70.5 degrees Celsius. Hot water can maintain satisfactory results in the long-term.
• Heat preservation function, stable water temperature
  • The thermal insulation material is made of Polyurethane (Pu for short), the thermal insulation degree reaches the first-class energy label.
•  Energy-saving, water and electricity saving
  • The pre-set water temperature of the water heater has a stable hot water supply, avoiding long-term heating and outputting high-temperature hot water, thereby reducing unnecessary power consumption and saving energy by up to 20%.
•  Top mount installation-the exhaust and vacuum valves are designed on the left/right (high pressure/central type)
•  Pressure reducing valve (over temperature and over pressure discharge valve)
•  Anti-backflow device
•  Complement with air mixing energy-saving shower head

Introduction of Rapid Heating EWH

Raise output water temperature by 20°C within 5 minutes(*). Provide water output continuously 40°C about 30 minutes at a flow rate less than 4 litres per minute after completely water heating of internal storage tank.

(*)Assume input water temperature 20°C - 25°C